Hole that PO cut
Patch after 10 minutes of fitting and 2 minutes of shaping
Patch 90% welded in. Check out the hole on the left side... Had to weld that mistake full (turned a 10 minute job into 1 hour)
Final grinding done Monday, June 8, 2009
Hole in trunk filled in
The PO cut a hole under the dash. My guess is he saw one too many episodes of BJ Mackay and his best friend Bear. I spent a couple hours undoing his hack job. Nothing major, just a little patch with some contouring.
Hole that PO cut
Patch after 10 minutes of fitting and 2 minutes of shaping
Patch 90% welded in. Check out the hole on the left side... Had to weld that mistake full (turned a 10 minute job into 1 hour)
Final grinding done
Hole that PO cut Patch after 10 minutes of fitting and 2 minutes of shaping Patch 90% welded in. Check out the hole on the left side... Had to weld that mistake full (turned a 10 minute job into 1 hour) Final grinding done 
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Let me know what you think about the project.